DSC Question

External Since: Jun 29, 2003 Posts: 7

I feel as if im pretty good with DSC equipment, and i tried everything with
this and as a last resort before i ditch the board i figured id ask.. the pc
5010 v1 wont communicate, ive tried every format and it connects to the c/s
sends info but doesnt finish , so it pauses ... then dials again .. and goes
threw the entire process and never sends a successfull signal, ive defaulted
the board, check the phone line, powered down .. etc ... and nothing
any last suggestions or is it just trash like im assuming?

Marc

External Since: Jun 29, 2003 Posts: 7

Ooops ignore that, meant for another group Smile

sorry guys and gals

"Marc" <sch009.RemoveThis@hotmail.com> wrote in message
news:bev6g7$9bcb2$1@ID-199979.news.uni-berlin.de...
> I feel as if im pretty good with DSC equipment, and i tried everything
with
> this and as a last resort before i ditch the board i figured id ask.. the
pc
> 5010 v1 wont communicate, ive tried every format and it connects to the
c/s
> sends info but doesnt finish , so it pauses ... then dials again .. and
goes
> threw the entire process and never sends a successfull signal, ive
defaulted
> the board, check the phone line, powered down .. etc ... and nothing
> any last suggestions or is it just trash like im assuming?
>
> Marc
>
>